Closed cycle drying

Closed cycle drying concept with Nitrogen purged process gas circuit

closed cycle drying

Closed Cycle drying system
This drying systems features drying in an inert gas atmosphere where nitrogen recycles within the dryer. This closed cycle drying system can be used for the spray drying of feedstock containing organic solvents or in situations where the product can not get in contact oxygen during drying. Closed cycle plants are gas and powder tight, and are designed to the strictest safety standards. The inflammable solvent vapors are fully recovered in liquid form.

Read more about closed cycle drying.

Semi closed cycle drying system
This drying system features either a partial recycle mode (recycle of up to 60% of the exhaust air as inlet air to the dryer, for effective waste heat utilization) or a self-inertizing mode, where direct air heating and a minimal air bleed create the low oxygen atmosphere necessary for drying aqueous feedstock that form explosive powder-air mixtures. If odor is generated during drying, the small volumes of air vented from the system can be effectively and economically incinerated.
semi closed cycle drying

Features to meet special design specifications:

  • Air dispersers for rotary and nozzle atomizer assemblies
  • Pressure shock resistant drying chambers with venting or suppression for explosion protection
  • Semi- or fully automatic cleaning systems (CIP)
  • Components designed to international sanitary standards
  • Conventional or computerized control systems
  • Air/air or air/liquid/air waste heat recovery units
  • Air-broom and air-sweep attachments for drying chamber
  • Noise attenuation of components
  • Weatherproof finish for outdoor installations
  • Rotary atomizers with inert gas purging
  • Semi- or fully automatic solvent cleaning systems
  • Gas tight: package plant test erected prior to shipment
  • Available with cyclones or bag filters
  • Condenser systems to ÷30° return to top.

For further information please contact
email

multi stage dryer | filter dryer | flash dryer | drying plants | chemical dryers | closed cycle drying | Niro

 

GEA Niro is the market leader in development, design and engineering of spray drying and spray dryer technology.


GEA Niro - Gladsaxevej 305 - P.O. Box 45 - 2860 Søborg, - Denmark
Tel +45 3954 5454 - Fax +45 3954 5800 - Email
Contact
A Company of the GEA Group
For US inquiries, please visit GEA Process Engineering Inc.: http://www.niroinc.com/